Training NDT

NON-DESTRUCTIVE TESTING (NDT)

Services & Training

The Aims and Objectives:

The main objective is to serve and train the industrial society with the qualified and certified personnel of Levels I, II and III in the Nondestructive Ultrasonic Testing techniques: The training and certification process is performed according to the American Society of Nondestructive Testing Recommended Practice SNT-TC-1A. The performance of service in industry will be responsible by ASNT NDT level III.

Training and Certification Methodology:

1. Syllabus of the training course is prepared according the Recommended Practice of the American Society of Non-Destructive Testing (SNT-TC-1A). The exams are composed of three tests, General Test, Specific Test and Practical Test.
2. Training includes theoretical and practical sessions. Testing equipment and samples with artificial defects are used during training.
3. The Specific Section of the training will be performed using Section V of the ASME Boiler and Pressure Vessel Code. Whoever, if the customer is applying another standard or code, it could be used in the training process as a substitute to Section V.
4. Each candidate has to pass three exams: General, Specific and practical.

Course Outlines:

1. Module (1) general: Discontinuities in Metals and alloys, overview of NDT techniques, qualification of NDT personnel, QA for UT.
2. Module (2) Ultrasonic Testing:

·         Ultrasonic waves, nature and propagation.

·         Pulse Echo Flaw Detector, Electronic Configuration and Scan Presentation.

·         Calibration of the test Equipment.

·         Flaw detection and sizing.

·         Applying acceptance/ rejection criteria.

Module (2) Penetrant Testing: (as SNT-TC-1A)

Module (2) Magnetic Particle Testing: (as SNT-TC-1A)

3. Module (3) ASME Code Requirements for Ultrasonic Testing (Related Articles “1 and 5”, of ASME Code Section V) or others Standards (AWS or others)
4. Module (4) Practical Session and Report Writing.
5. Examinations: Each Module is followed by the certification exams which are prepared according to the requirements of the American Society of Nondestructive Testing ASNT-TC-1A Recommended Practice. The exams are composed of three tests, General Test, Specific Test and Practical Test.

Course Coordinator and Lecturer:

-    Ir. Saenal Aladin Rapi, is a NDT professional for aircraft who has performed extensive application work in the Garuda Maintenance Facility including: Boeing-747, MD, Airbus-300 etc.

He is certified as NDT-Level III. He has been involved in submitting ASNT conference in US and training to various industrial sectors.

He has been responsible for the professional training programs in the fields of welding, casting, airframe, NDT standards etc at National Standardization Board and Indonesian Societies of NDT. He is also Auditor ISO-17021 on behalf of National Accreditation Board.

Presently, he is a General Manager of inspection division of GMF, Garuda Aeroasia.

-    Drs. Baskan Hanurajie, M.Eng, is a NDT researcher in National Nuclear Energy Agency who has performed extensive application work in the oil and gas, aircraft maintenance in order to synchronization between laboratory and operations field.

He has been as a visiting scientist at Japan Atomic Energy Agency in Ibaraki for Infrared thermography research and studied ultrasonic testing at Yokohama National University.

He is certified as NDT-Level III. He has been involved in submitting NDCM conference in Berlin, Germany and JSNDI conference in Tokyo, Japan. He also trained to various industrial sectors in Japan and Korea. He has responsible for the professional training programs in the fields of Radiographer interpreter, others NDT, quality management system ISO-17024, 17025, plan maintenance, etc

Finally, he has several published articles and research papers and he also as National Examiner for Radiographer level 1 and 2.

-    Putra Darma, BE ­ is a NDT researcher in National Nuclear Energy Agency who has performed extensive application work in the oil and Gas Company, aircraft, petrochemical, fabrication. He is certified as NDT-Level III and Welding Inspector. He has been involved in training to various industrial sectors in Italy. He has been assistance for the professional training programs in the fields of Radiographer interpreter, penetrant testing also others NDT, quality management system (ISO-9001, OHSAS-18001, ISO-17020), plan maintenance, etc

-    Drs. Teguh Suwargono is a NDT practice in National Nuclear Energy Agency who has performed the managerial for nuclear installations. He has many experiences in NDT field and training. He is certified as NDT-Level II and Welding Inspector, He performed NDT in many field such as Oil and Gas, Mining, aircraft inspection, witnessing for ASME stamp, welding on construction and fabrications. He has also performed for quality control in NDT.

-    Hendrik is an ASNT NDT level II

-    Irwan is an ASNT NDT level II

Our Clients:

-    PT. ANI (Aviation Nusantara Indonesia)	-    PT. Mahkota Pratama Karya Insani
-    Technical Crew of Cambodian Air	-    PT. STAR AERO ENGINEERING
-    GMF	-    QATAR MAINTENANCE SERVICES
-    Batavia Air	-    PT. TIFICO
-    PT. TEHA, Bandung	-    PT. SOUTH PACIFIC VISCOUSE
-    PT. DNX Indonesia	-    PT. VOITH INDONESIA
-    PT. SATOIL	-    PT. SURVEYOR INDONESIA
-    PT. ADIVET	-    PT. Punj Lloyd
-    PT. Danalam Cipta Pratama	-    PT. FRANKLIN INDONESIA

Office address:

The course will be held at Puri Sentosa, Blok H-1, BSD-City, or with request. If any request please call me on 021.7126.4541 or ndt@asia.com